Control Electronics

電子コントローラ

デジタルコントローラ クインズゲートの超高速、完全デジタル閉ループ・エレクトロニクスは、クインズゲート・ナノメカニズム製品向けの完全な最高レベルのソリューションです。NPSシリーズは、ピエゾドライブ増幅器、容量ポジションセンサ回路、サーボ制御性能を組み合わせています。当社開発の先端制御技術は、既存制御技術 より30倍の精度の21ビット分解能を達成しています。バーチャルなフロントパネル・ソフトウェアにより、ユーザはPIDループ設定を含むすべての運転パラメータを制御できます。

• スタンドアロン・システムは、ユニバーサルインプット・パワーサプライで3チャンネルまで提供

• 21ビット実効分解能、7桁浮動小数点コマンド

• 直線性誤差0.02%以下

• 異なるユーザ設定で機能の保存およびリコール

• ユーザソフトウェア・インターフェースは、ノイズ、周波数応答および整定時間、最適化を許可します

• 包括的コマンド言語DLL

• 内臓型RS232またはUSBインターフェース、DSPシリアルポートを標準装備として提供します

• 工場出荷時設定でステージとコントローラの互換性

アナログDSコントローラ NPC-A-1110DSは、従来のPID制御と新しいDual Sensor Technology(デュアルセンサ技術)を組み合わせた最初の完全なアナログ・クインズゲート・コントローラであり、ナノポジショニング・ステージで比類ない性能を発揮します。業界トップの応答および整定時間のおかげでこれまでになかった処理能力が達成できます。NPC-A-1110DSは、features +/-10VアナログおよびTTLインプット、マニュアル・オフセット、ポジション表示、切り替え可能ライト(暗い部屋で)、サンプル保護のためのソフト・スタート/ストップを特徴としています。

Dual Sensor Technology(デュアルセンサ技術)は、従来の固定ノッチフィルタ付きPIDコントローラの限界を克服する新しい制御技術で、ステップ応答性を高め、ペイロード変更に対して高い安定性を実現し、システムのメカニカル帯域の大幅な改善を可能にしています。

  • CM (DPT control)

  • The Control Module (CM) contains the position sensing electronics and piezo drive amplifiers necessary to drive the DPT-C. It can operate standalone from ± 15V DC and has a 14 bit TTL parallel digital interface, an analog input, Position Monitor and Ready Signal. A separate Control Module is required to drive each DPT-C.
  • NPC-A-1110DS

  • Dual Sensor Technology is a new control technique that overcomes the limitations of conventional PID controllers with fixed notch filters, allowing faster step responses, higher stability against payload changes and a dramatic improvement of the system mechanical bandwidth.
  • NPS2100 Series (Stage control)

  • The NPS2100 is a NanoSensor, high voltage amplifier and control electronics combined as a single channel standalone module, powered by an external +/-15V, 130V and -30V DC supplies.
  • NPS2110 Series (Stage Control)

  • The NPS2100 is a NanoSensor, high voltage amplifier and control electronics combined as a single channel standalone module, powered by an external ±15V, 130V and -30V DC supplies.
  • NPS3000 Series (Stage control)

  • The NPS3000 series closed loop controllers are the Next Generation of NanoPositioning systems from Queensgate®. Designed specifically to control Queensgate's Nanometer Precision Mechanisms.
  • NS2000 (Sensor controller)

  • The NS2000 is a single channel stand-alone electronic module for driving the NX NanoSensor series. It operates by measuring the change in capacitance of a parallel plate capacitor and outputs an analogue voltage proportional to the NanoSensor gap. The voltage output varies linearly between -5V and +5V as the sensor gap changes from 50% to 150% of the nominal NanoSensor gap.
各種お問い合わせ
お問い合わせフォームはこちら

当ウェブサイトの一部のコンテンツはPDF形式となっております。PDFファイルのデータシートを閲覧するには、ADOBE ACROBAT READER が必要です。ご使用のパソコンにインストールがお済みで無い方は、下記リンクからダウンロード下さいますようお願いします。

Get ADOBE READER